RF Key Pad for operation of a 6 channel RP system.

Key Pads are a simple and effecient method to deliver a wall mounted control solution for multiple motors. The alternative would be a row of switches, which are not as visually pleasant, or cost effective.

When installing an RF Key Pad, simple locate the wall plate where the client desires, screw to wall then cut out the rectangle in the center, exposing a hole into the wall cavity. K6-RF comes with a 12" modular cable allowing the transmitter to rest inside the wall. Should the reception of the RF signal be insufficient to operate the motors, simply lengthen the cable enough to achieve the results needed.

K6-RF is a programming device, it can program an RP motor controls operational features to its full potential, motor addresses up to channel 6.

RF Key Pads are battery operated by 3 AAA batteries. The transmitter module is designed to be consealed in a wall cavity. The screwless mounting plate allow for easy removal and replacement of the batteries.

Should a project have fewer than 6 motors, the unused channels could be programmed as a Sub Group or Master Group channel, making a K6-RF a clean and simple solution for smaller projects or rooms within larger projects.