| |
| Dealer Timer v.3 |
Programmable bus interface, that when plugged into the RP Bus allow for timed commands to be sent, resulting in actions. |
| LSTEN-INT |
Sun Sensor installed in an interior box, for easy interior installation into either the RP60ASM-B or RP60AUM with SSBP. No cable is included in this kit, select jumper cable that best suits your job. |
| MAK-TIMER |
Interface to incorporate a white Makita wall mount timer for control of RPs. |
| PSI124 |
Programmable Switch Interface Converts from a Simple Wall Switch to an IR Link.
|
| R2D7 |
RS232 interface for serial commands. System allows for control of up to 420 motors per unit – versions 1 thru 4.
R2D7 v4.1 (current version) |
| REP |
REP is a device that cures installation issues related to lightings effects on an IR system. By reviewing all incoming IR signals, REP will only output valid RP bus commands, filtering out all unwanted IR interference. Also used for a solution when strange IR problems inhibit IR system performance. |
| REP TTI |
Techniku Timer Interface with built-in repeater. Converts Techniku code into RP60 code and uses RP Bus to operate motors. Also used for a solution when strange IR problems inhibit IR system performance. |
| SS |
Sun Sensor Control Unit with Sensor
|
| SSP |
Programmable Sun & Wind Sensor Control Unit with Light Sensor – versions 1 and 4.
|
| SSPB |
Programmable Sun Sensor control unit. Input devices must be added to SSPB to make up a complete part - versions 1 thru 3. |
| Timer |
Techniku Chronolux™ Timer. Operates 4 separate groups via wireless IR installation. Requires REP/TTI. |
|
- updated
01-Apr-2008
-
|
