| |
| Dealer Timer |
Programmable bus interface, that when plugged into the RP Bus allow for timed commands to be sent, resulting in actions. |
| LVT |
Low Voltage “Trigger”: This device takes a DC low voltage input commonly from a projector and turns it into a dry contact output, to be used with any system of RPxx control. Must be used with RP motor control. |
| LVT BUS |
Low Voltage “Trigger”: This device takes a DC low voltage input commonly from a projector and turns it into an RP Bus output, to be used with any system of RPxx control. Must be used with RP motor control. |
| PSIB |
Programmable Switch Interface – converts 2 manual switch inputs into commands for use on RP Bus . Programmable channels 1 thru 60 & ALL. Packaged in a surface mount box with a built-in 2E2R Splitter. |
| PSI60 |
Programmable Switch Interface – converts 2 manual switch inputs into commands for use on RP Bus. Programmable channels 1 thru 60 & ALL. |
| PSSW |
Programmable Switch, Sun & Wind Sensor control unit. Input devices (Light Sensors, Wind Anemometers, SPST Switch) must be added to PSSW to make up a complete part. |
| R2D7 |
RS232 interface for serial commands. System allows for control of up to 420 motors per unit. |
| Sena LS100 |
Ethernet to Serial device to control R2D7 and the RQ Bridge via Ethernet. Comes with its own power supply and instructions. The LS 100 can have a static IP address assigned to it, allowing for direct access to any device connected to it via Ethernet connection, including a Companion. |
| TIMER LCD |
LCD Digital Clock that provides 7 on/off (open/close) timed actions per day. |
|
- updated
15-Oct-2008
-
|
